RW.RC 2-6S 30A/50A/70A/125A/200A ESC 5V/2A 5V/5A UBEC Brushless Speed Controller ESC For RC Car Boat

Note：ESC without brake function

30A ESC / RW
1: Voltage range 7.4V – 11.1V (4—12NIMH 2-3LIPO)
2: Internal resistance 0.003 MR
3: Featured high performance FET
4: Single-section LIPO protection voltage 3.0V
5: continuous working current 30A instantaneous 50A (10 seconds)
6: PWM frequency 8K/16K/32K
7: Size: 40 X 24 X 7 (mm)
8: Weight: 12 grams (excluding line) 22 grams (including line)
9: Supports most models with brushless sensorless motors, 14-pole motor speed can reach 30,000 RPM.
10: BEC 5V 2A Instant 3A Supports High Torque Hollow Cup Digital Servo

50A ESC / RW
1:7.4V—11.1V (4—12NIMH 2-3LIPO)
2: Size: 46x 35 x 8 mm
3: Weight: 60 grams
4:: Featured high performance FET
5: internal resistance 0.002MR
6: Single section LIPO protection voltage 3.0V
7: Continuous working current 50A instantaneous 430A (10 seconds)
8: PWM frequency 8K/16K/32K
9: Supports most models with brushless sensorless motors, 14-pole motor speed can reach 30,000 RPM
10: BEC 5V 2A Instant 3A Supports High Torque Hollow Cup Digital Servo

70A ESC / RW
1: Voltage range 7.4V – 14.8V
2: Size: 68 x 35 x 8 mm
3: Weight: 60 grams
4: Voltage range: voltage range 4.8V—15V (4—12NIMH 2-3LIPO)
5: internal resistance 0.002MR
6: Single section LIPO protection voltage 3.0V
7: Continuous working current 70A instantaneous 430A (10 seconds)
8: PWM frequency 8K/16K/32K
9: Supports most models with brushless sensorless motors, 14-pole motor speed can reach 30,000 RPM.
10: BEC 5V/5A Instant 3A Supports High Torque Hollow Cup Digital Servo

125A ESC / RW
1: Size: 68 x 35 x 12 mm
2: Weight: 90 grams
3: Voltage range: voltage range 7.4V – 14.8V
3: Internal resistance 0.001M
4: Single-section LIPO protection voltage 3.0V
5: continuous working current 100A instantaneous 520A (10 seconds)
6: PWM frequency 8K/16K/32K
7: Supports most models with brushless sensorless motors, 14-pole motor speed can reach 30,000 RPM.
10: BEC 5V/5A Instant 3A Supports High Torque Hollow Cup Digital Servo

200A ESC / RW
1: Size: 68 x 40 x 12 mm
2: Weight: 90 grams
3: Voltage range: voltage range 7.4V – 14.8V
3: internal resistance 0.001MR
4: Single-section LIPO protection voltage 3.0V
5: continuous working current 200A instantaneous 756A (10 seconds)
6: PWM frequency 8K/16K/32K
7: Support most models with brushless sensorless motor, 14-pole motor speed can reach 30,000 RPM

Additional features:
Support reversing function
Support half-slope start
Throttle position error prohibits starting
Automatically learn the throttle stroke
Error signal off power
The receiver has no signal alarm and turns off the output.
Multi-function adjustment motor characteristics

Precautions for use:
1. This device is designed for battery energy. Other types of power supply cannot be used. If other power sources are used, it may damage the device or power supply.
2. This device is a remote control model product and cannot be used on the manned system to prevent it.
3, This equipment is a high-power electronic product, which will generate a lot of heat during work. Please pay attention to maintain forced air cooling conditions.
4. This device has a power supply voltage detection system inside. When connecting to the battery, please use the shortest connection cable and ensure the battery with sufficient current. In order to avoid the wrong action of the voltage system, affecting the use.
5. This device is not allowed to drive 2 or more motors at the same time to avoid malfunction.