Australian Dollar (AUD)
British Pound Sterling (£)
CNH (CNH)
Canadian Dollar (CA$)
Danish Krone (DKK)
Egyptian Pound (EGP)
Euro (€)
Hungarian Forint (HUF)
Israeli Shekel (ILS)
Japanese Yen (¥)
Kuwaiti Dinar (KWD)
Malaysian Ringgit (MYR)
New Zealand Dollar (NZ$)
Polish Zloty (PLN)
Qatari Riyals (QAR)
Saudi Riyal (SAR)
Singapore Dollar (SGD)
South African Rands (ZAR)
Swiss Franc (CHF)
Turkish Lira (TRY)
US Dollar ($)
United Arab Emirates Dirham (AED)
EDIAG YA101 OBDII Code Reader For Car Engine OBD2 system function
Why choose our EDIAG YA101?
1. Enhanced OBDII Diagnostic Functions:Read & Clear DTCs, I/M Readiness Status, Read Freeze Frame and Data stream, Read Vehicle Information, O2 Sensor Test, On board Monitored systems Test (mode 6), EVAP Test (mode 8),Turns off Malfunction Indicator Light.
2. With some special Features,scuh as Multi-language,battery test, colorful screen display data,and so on.
3. It works for almost 99% car brands on market, all 12V 16PIN OBDII car after 1998 year. Meets 9kinds of protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
4. EDIAG YA101 supports free update life time.(only 2 steps so easy)
5.Language list: English,chinese,France,Deutsch,Italian ,Japanese,Espanish,Russian,Portuguese
6.We have EU/RU/US/CN/AU/UK/DE kinds of overseas warehouse, seller pay tax fee,delivery so fast .
The Functions list of EDIAG YA101 OBD2 Scanner
Read Codes : Reads DTCs from vehicle's computer with KOEO or KOER. Erase Codes: Deletes DTCs from vehicle's memory. Live Data: Live Data menu lets you view, record and playback real time PIDs data fromthe electronic control module. In live data menu, you can insert the selected item to front by holdingpressing the key for 3 seconds. O2 Sensor Test: Displays oxygen sensor monitoring test results from the vehicle's memory,the O2 Monitor Test is NOT an ON-DEMAND TEST. I/M Readiness: Displays a snapshot of the state of the vehicle's OBDII Monitors. NOTE: * To review I/M Readiness status,make sure that the ignition key is switched to ON with the engine off. * Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests: * since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared. * This Drive Cycle-shows status of monitors since the start of the currentdrive cycle. DTC Look Up: Looks up definitions of DTCs stored in scan tool, and shows the possible causes of the DTC. (NOT every DTC with possible causes reason) Voltage/Battery Test :This function is used to monitor the voltage present on pin 16 of the OBDIIData Link Connector. Freeze Frame: Displays a snapshot of operating conditions at the time of a fault. Update Free : pls install update tool from Official webiste, and copy the newest firmware ,paste to the YA101. //www.ediagtool.com/plus/list.php?tid=7 Vehicle Info: Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)The tool also displays In-Use Performance Tracking of importantreadiness monitors. Component Test: Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu .This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle. On-Board Monitoring: Scan tool controls the operation of vehicle components, tests or systems. Data Logging: Turn on /off the data log function to record the device data through vehicle. Self-test : Display Test. Used to check the display screen. Keyboard Test. Verifies that the keys are working correctly. Screenshots : EDIAG ya101 can do screenshot as photos,if you does not have time to print the error data from the pc, it will help you to record the data .
EDIAG YA101 Support Car Models
American Car : Need Standard OBD2 Protocols from 2000 to now
European Car : Need Standard OBD2 Protocols from 2003 to now
Japanese/Korean Car: Need Standard OBD2 Protocols from 2006 to now
Chinese Car: Need Standard OBD2 Protocols from 2009 to now
Russian Car ：Need Standard OBD2 Protocols from 2012 to now
EDIAG YA101 Supports 9kinds of CAR OBDII Protocols list :
(Note: YA101 only Support 12V cars, Does not support 24V Truck )
YA101 Support OBD 2 protocols car :
1.SAE J1850 PWM(41.6Kbaud)
2.SAE J1850 VPW(10.4Kbaud)
3.ISO9141-2(5 baud init,10.4Kbaud)
4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)
5.ISO14230-4 KWP(fast init,10.4 Kbaud)
6.ISO15765-4 CAN(11bit ID,500 Kbaud)
7.ISO15765-4 CAN(29bit ID,500 Kbaud)
8.ISO15765-4 CAN(11bit ID,250 Kbaud)
9.ISO15765-4 CAN(29bit ID,250 Kbaud)
Can EDIAG YA101 remove error engine light ?
Of course,EDIAG YA101 Supports to remove car engine light ,which has problem on the car OBDII emissions.
1.Turn Off ''Check Engine'' Light
Parts cause your check engine light on include:
1. Gas Cap 2. Oxygen Sensor 3. Air Fuel Ratio Sensor
4. Mass Air Flow Sensor 5. Ignition Coils 6. Spark Plug Wires
7. Spark Plugs 8. Thermostat 9. EGR Valve
10. Evaporatative Emission Canister Purge Valve(EVAP) 11. Catalytic Converter.
2.Decreased fuel consumption,Decreased engine noise.Decreased in temperature , ect .
If the engine light is not turned off in time.it will Cause Serious environmental pollution
How to check whether the vehicle pass the emission test with this code reader?
After entering the I/M Readiness, there will be 10 results on the list. Misfire monitor, fuel system, componentmonitor, catalyst monitor, heated catalyst, EVAP system, secondary air sys, 02 sensor, O2 sensor heater EGRand/or WVT. There will be an OK if each of them works fine. [Not all vehicles have these 10 parts]
Special operation notice when you use EDIAG YA101:
Locating Data Link Connector
1.Choose a location under driver side dash under steering wheel) and use that description in both places.
2.If unsure about location of dlc, check vehicl manual or reputable service center about location
Connect the tool
1.If the connector is not there a label should be there indicating the whereabouts of the connector.
2:If necessary, remove the cover from the DLC
3.Turn the ignition switch to the on position. Do not start the engine
4.Plug the oBD connector into the Data Link Connector.
the vehicle identifie
5.The tool will attempt to identify the vehicle. If successful, the vehicle identifie lisplayed. if the vehicle cannot be identified, menus will be shown for you to select the vehicle manually.
Packing List:
1pc * YA101 Code Reader
1pc * English User Manual
1pc * Carton Box ![]()
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- We proudly offer a full satisfaction guarantee. Our highest priority is to make you happy, so every order comes with a 60-day money back guarantee!
- 100% Safety & Security Guaranteed. At electrongo.com, we take your security and privacy very seriously. Shop safely using the world’s most popular and trustworthy payment methods!
BUY WITH CONFIDENCE
We truly believe in the best customer support, meaning we will do whatever it takes to make sure you have a positive purchase experience. We respond to emails within 24 hours and always make sure all your concerns are answered ASAP.
- Easy Returns. All our products are backed with 60-day money back guarantee. Just contact us and we will refund the purchase price.
- Risk-Free Purchase: Our Buyer Protection covers your purchase from click to delivery so you can shop with peace of mind.
- 100% Satisfaction Guarantee: All our products are backed with 60-day money back guarantee. If for any reason you’re not completely satisfied with your purchase, contact us for a product refund. We’ll be more than happy to assist you.
